Following compents are neccessary to build the OpenVario Flight Computer (You can download the complete BOM Bill of Material here). In case you have difficulties to purchase parts in small quantities, check out the Builders Blackboard, where you will find most parts or even kits for a reasonable price.
| Part / Assembly | Quantity | Comment |
|---|---|---|
| Adapterboard | 1 | see below |
| Connectorboard | 1 | |
| Sensorboard (optional) | 1 | see below |
| Cubieboard 2 | 1 | |
| LCD PQ070WS01 or PQ070WS02 | 1 | |
| Touchscreen ast070a080 (optional) | 1 | |
| Housing | 1 | see below |
| µSD Card | 1 | |
| Jumper cable female / female | 3 | |
| Power supply cables and connectors | as required |
| Value | Part | Part Count | Vendor | Vendor P/N |
|---|---|---|---|---|
| 100nF | C1-C8,C12 | 9 | Farnell | 644249 |
| 10uF | C9 | 1 | Farnell | 1867958 |
| 220uF | C10 | 1 | Farnell | 1868409 |
| 2.2uF | C11 | 1 | Farnell | 1657931 |
| Diode | D1 | 1 | Farnell | 9557377 |
| Fuse 1.5A | F1 | 1 | Farnell | 1597003 |
| MAX3232E | IC2,IC3 | 2 | Farnell | 1494919 |
| ADS1110 | IC4 | 1 | Farnell | 1206859 |
| 12uH | L1 | 1 | Farnell | 1864135 |
| 120K | R2 | 1 | Farnell | 1577687 |
| 10K | R1 | 1 | Farnell | 1575900 |
| FPC-Conn | X1 | 1 | Farnell | 1509141 |
| FPC-Cable | 1 | Farnell | 2096086 | |
| 3pin power | X2 | 1 | Farnell | 9632689 |
| Cubie-Connect 2mm 2×25 | 2 | Ebay | Ebay | |
| Touch-Connect | 1 | N/A | included with Touchhscreen | |
| DC/DC converter | 1 | Neuhold | Neuhold | |
| 2×05 Socket Header | 3 | Ebay | Ebay | |
| 2×06 Socket Header | 1 | Farnell | 2215306 | |
| 3,3V regulator | 1 | Farnell | 7261373 | |
| PCB | 1 | Seedstudio? |
| Value | Part | Part Count | Vendor | Vendor P/N |
|---|---|---|---|---|
| RJ45 Quad Socket | J1 | 1 | Farnell | 2215318 |
| Fuse 500mA | F1-F4 | 4 | Farnell | 1597001 |
| 2×06 Socket Header | 1 | Farnell | 2215306 | |
| 2×06 Cable Plug | 2 | Farnell | 2215233 | |
| 2×06 Cable | 1 | Neuhold | Neuhold | |
| PCB | 1 | Seedstudio? |
| Value | Part | Part Count | Vendor | Vendor P/N |
|---|---|---|---|---|
| 1uF | C1-C8,C18 | 9 | Farnell | 2320857 |
| 100nF | C9,C12-C17,C20 | 9 | Farnell | 644249 |
| 2.2nF | C10 | 1 | Farnell | 1759235 |
| 10nF | C11 | 1 | Farnell | 1759246 |
| 0.33uF | C19 | 1 | Farnell | 1759153 |
| 10K | R1,R2 | 2 | Farnell | 1575900 |
| 20K | R3,R4 | 2 | Farnell | 1652954 |
| Ferrite | L1-L4 | 4 | Farnell | 2292410 |
| RJ11 | J2 | 1 | Farnell | 1642040 |
| Klinke | J3 | 1 | Farnell | 1216980 |
| Cinch | J4 | 1 | Farnell | 1280698 |
| DS2482-100 | U10 | 1 | Farnell | 1593289 |
| 1K I2C Serial EEPROM | U11 | 1 | Farnell | 1296569 |
| MS5611 | 2 | Ebay | Ebay | |
| MPU9150 | 1 | Ebay | Ebay | |
| AMS-5915-0050-D | 1 | AMSYS | AMSYS | |
| AS1360-33 (obsolete) Drop-in-Replacement: MCP1700T-3302E/TT | 4 | Farnell | 1296592 | |
| AS1701 | 1 | AMS | ||
| Plastic Cover | 1 | P.H. | Make from 1/2“ POM sheet | |
| M2x16 Screw | 8 | MBL | ||
| M2 Nut | 8 | MBL | ||
| Brass Tube 3mm | 2 | MBL | ||
| Tube fitting M5 | 3 | www.droh.de | Droh | |
| Sealant | as required | MBL | ||
| Silicone Tubing | as required | MBL | ||
| 2×05 Socket Header | 1 | Ebay | Ebay | |
| 2×05 Cable Plug | 2 | Ebay | Ebay | |
| 2×05 Cable | 1 | Neuhold | Neuhold | |
| PCB | 1 | Seedstudio? |
| Part | Quantity | Comment |
|---|---|---|
| Front Frame | 1 | aluminum sheet 1.5mm |
| Aft Frame | 1 | aluminum sheet 1.5mm |
| Upper Cover | 1 | aluminum sheet 1.5mm |
| Lower Cover | 1 | aluminum sheet 1.5mm |
| Lower Backplate | 1 | aluminum sheet 1.5mm |
| Upper Backplate | 1 | aluminum sheet 1.5mm |
| Front plate | 1 | aluminum sheet 3mm |
| Side parts | 2 | aluminum sheet 3mm |
| Front frame | 1 | aluminum plate 20mm |
| M2x5 screw flush head | 4 | |
| 10x5x98 aluminum bar | 2 | |
| M2.5×5 screw, black | 4 | |
| spacer M3, 20mm long | 4 | |
| M3x6 screw flush head V2A | 12 | |
| M3x16 screw pan head | 4 | |
| spacers di = 3mm, da=7mm | 4 | |
| pop rivet 3.2mm, 3mm grip length | 24 | |
| self-tapping screw 2.9×6.5mm V2A, flush head | 8 | |
| self-tapping screw 2.9×6.5mm V2A, pan head | 4 | |
| M3x16 grub screw | 4 | |
| M3 nut, self locking | 4 | |
| Grommet | 1 | |
| Thread locking adhesive (high strength) | as required | |
| Double side adhesive tape | as required |
Back to Build